Aqua Shield HD™
Technical Data
How Aqua Shield HD Works
Aqua Shield HD works using advanced nano technology. It reacts with the surface pores to leave an invisible, breathable, protective barrier against water and oil-based staining.
Unlike an acrylic (topical) sealer — which sits on top of the surface like an expensive "cling wrap" that eventually yellows and peels — Aqua Shield HD penetrates and becomes part of the substrate, chemically protecting it from within. Because it's non-film-forming, it can't peel or flake, and the surface stays breathable.
Penetrating vs Topical (Acrylic) Sealers
The difference between a penetrating sealer and a topical acrylic sealer, side by side:
| Feature | Aqua Shield HD | Acrylic Sealer |
|---|---|---|
| Latest industry-leading technology | ✓ | ✗ |
| Chemically modifies the substrate | ✓ | ✗ |
| Wet or dry application | ✓ | ✗ |
| Fast spray application | ✓ | ✗ |
| Single coat | ✓ | ✗ |
| Oil & water stain resistance | ✓ | Sacrificial only |
| Non-slip | ✓ | ✗ |
| Long lasting | ✓ | ✗ |
Product Features
- Deep penetrating and impregnating — becomes part of the substrate
- Advanced nano technology
- Water-based, non-flammable and odourless — no toxic fumes
- Non-film forming — will never peel or flake
- Highly breathable — allows water vapour to escape
- Superior stain resistance against oil, grease, graffiti, coffee and wine
- Doesn't alter the surface's coefficient of friction or slip rating
- Anti-bacterial and silica-dust protection
- Efflorescence, salt attack and stain protection
- Reduces moss, mould and algae growth
- Reduces corrosion attack on steel reinforcing
- Retains the natural look — won't etch, alter or discolour
- Alkali resistant and food safe
- Salt barrier — ideal around saltwater pools and marinas
- Quick-dry formula; can be applied while the surface is still damp
Surfaces & Application
Suitable surfaces
Designed for granite, bluestone, travertine, limestone, slate, sandstone, terracotta, porcelain, ceramic tiles, concrete, and all types of pavers and roof tiles.
How to apply
- Always do a trial on a small test patch first.
- Make sure the surface is clean — it can be dry or still damp, but not dirty.
- Protect adjacent areas from splashing or overspray.
- Apply liberally by low-pressure sprayer, lamb's wool applicator, bristle broom, brush or roller.
- Flood-coat the surface to a "wet" look — don't let the product pool.
- Wipe, broom or buff off any excess after 15 minutes with a clean, dry cloth or floor pad.
- Allow to dry — walk on after 4 hours; full cure in 24 hours.
Technical Data Sheet
Download the full Aqua Shield HD technical data sheet & diagram (PDF).
Avoid Costly Mistakes
See what goes wrong with the wrong sealer — and how to protect your surfaces.